When you compare a steel structure to a traditional wood building, the difference in upkeep is night and day. Wood rots, warps, and requires constant resealing. Steel, by contrast, is designed for durability. But while steel buildings are famous for requiring minimal maintenance because of improvements in materials and design, “minimal” does not mean “zero.”
Think of your Norsteel building like a reliable vehicle; it doesn’t need a new engine every year, but it does need a wash and a quick check-up to keep running smoothly. A simple, bi-annual routine is often all that is needed to maintain its value and appearance.
For the complete technical breakdown, you can download the official Norsteel Buildings Preventative Metal Building Maintenance Manual.
The "Twice-a-Year" Strategy
You don’t need a complicated calendar to manage a steel building. We recommend a simple inspection schedule performed twice annually.
- Spring Check: Inspect your building closely following winter to identify any shifts caused by the freeze/thaw cycle.
- Fall Check: Perform an inspection early enough in the fall to complete necessary repairs before winter sets in.
Safety First: The Rules of the Roof
Before we discuss cleaning or repairs, we must address safety. If your inspection requires you to go up on the roof, you need to know where to step to avoid damage to the building, and injury to yourself.
- Watch Your Step: Roof traffic is a leading cause of leaks. If you must walk on the roof, avoid stepping on the panel ribs between the purlins or on the ridge caps. Always try to walk on the flats of the panel where the structural support is strongest.
- Fall Protection: Always use approved fall protection when working in elevated places.
Exterior Maintenance: As Simple as Washing Your Car
Over time, your building will accumulate dirt, dust, and debris. If left unchecked, these can combine with sunlight and moisture to attack the surface. Fortunately, cleaning your steel building is straightforward.
The Cleaning Protocol:
- For heavy dirt, a simple solution of water and common detergent (like 1/3 cup of Tide per gallon of water) is highly effective. For mildew, you can add Tri-Sodium Phosphate (TSP) to the mixture.
- In most cases, a fresh water washing using a regular garden hose under pressure is all you need. You can use a soft-bristled brush or a long-handled push broom to scrub the panels gently.
- Never use wire brushes, steel wool, or sandpaper. These will scrub away the protective coating. Also, avoid harsh industrial solvents; stick to gentle household cleaners or mineral spirits for tough spots like tar or grease.
Landscaping and Soil: Keep it Clear
One of the easiest ways to protect your building is simply keeping the perimeter clear.
- Wall panels should always be kept clear of dirt and soil. Ensure that moisture isn’t being held against the metal base.
- Keep bushes and trees trimmed back from the panel surfaces. Branches rubbing against the wall in the wind can scratch the paint, and wet leaves held against the steel can trigger corrosion.
Fastener Inspection: The "Tightness" Check
Your building is held together by high-quality fasteners. Over time, thermal expansion (warming and cooling) can cause minor movement. During your spring and fall walks, check for loose screws.
If you find a loose fastener, do not just over-tighten it if the hole is stripped. Instead, remove the unseated screw and replace it with the next larger fastener size. This ensures a fresh “bite” into the steel and a tight seal.
Interior Check: Insulation and Condensation
What happens inside your building affects the steel shell. A quick interior walkthrough can reveal hidden issues.
- Insulation Integrity: Check your insulation facings (the white vinyl backing) once a year. If you find tears, repair them with vinyl tape immediately. A torn vapor retarder allows moist interior air to move into the insulation, where it can condense and rust the panels from the inside out.
- Condensation & Air Pressure: If you see moisture, it might not be a leak, it could be condensation caused by “negative pressure.” This happens when your HVAC system or exhaust fans pull too much air out of the building, creating a vacuum that sucks moisture in through small cracks. Balancing your air intake is crucial for keeping the building dry.
Roof & Gutter Maintenance
Your roof is your primary shield. Keeping it clean is the most important maintenance task you can perform.
- Clear Debris: At least once a year, clean the roof and gutters of leaves, sticks, and debris. Debris traps moisture, which leads to rust.
- Check the Flow: Ensure downspouts are free of clogs and drain freely. Blocked gutters can become heavy enough to fall.
- Dissimilar Metals: Never allow copper or lead materials to touch your Galvalume® roof.
- AC Units: Ensure condensate lines from rooftop AC units are piped to the exterior; this water often contains copper or lead elements that will eat through your roof if allowed to drain directly onto the panels.
Snow Removal: A Careful Approach
Unlike wood roofs that may sag unpredictably, steel buildings are engineered for specific loads. However, if you determine snow removal is necessary, you must do it carefully to avoid damaging the panels.
- Leave a Layer: Do not remove snow down to the bare metal. Leave at least 3 inches of snow on the panels. This protects the fasteners and the paint finish from your shovel.
- Use the Right Tools: Never use a metal shovel. Use plastic tools to prevent gouging the roof.
- The Technique: Remove snow from the middle one-third of each bay first, then move to the remainder. This balances the load on the frame.
Conclusion
A Norsteel building is a low-maintenance asset designed to last. By following this simple checklist: washing the panels, tightening loose screws, and keeping the perimeter clear, you protect your warranty and your investment.
Routine care keeps your building virtually weather-tight and looking professional for years to come.
FAQs
How often should I inspect my metal building?
We recommend inspecting your building at least twice annually: once in the Spring and once in the Fall.
What is the best way to clean the walls and roof?
A regular garden hose under pressure and a soft-bristled brush work best. For dirt buildup, use a mixture of water and a common detergent.
Can I use a pressure washer?
You should use caution. It is recommended to use a regular garden hose under pressure. If using high pressure, be extremely careful not to drive water into the panel laps or insulation.
How do I fix a stripped screw?
If a fastener is loose or stripped, replace it with the next larger fastener size to ensure it seats properly.
What materials should I keep away from my steel roof?
Avoid contact with copper, lead, graphite (pencils), and treated lumber. These materials could cause a chemical reaction that damages the protective coating.
Where can I find more information or a comprehensive guide on steel building maintenance?
Check out our Steel Building Maintenance Guide on our Manuals page.





