Promo !
Kit de construction en acier 20 x 24 x 12
Kit de construction en acier 20 x 24 x 12 – Image 2
Kit de construction en acier 20 x 24 x 12 – Image 3
Kit de construction en acier 20 x 24 x 12 – Image 4
Kit de construction en acier 20 x 24 x 12 – Image 5
Kit de construction en acier 20 x 24 x 12 – Image 6

Kit de construction en acier 20 x 24 x 12

Le prix initial était : $38,669.00.Le prix actuel est : $20,108.00.

  • Kit de construction en acier DIY de 20′ x 24′ x 12′.
  • Une ouverture encadrée de 10′ x 10′.*
  • Une ouverture encadrée de 3′ x 7′.*
  • Pente de toit norme 2/12.**
  • Choix de couleurs pour les murs et les boiseries ; couleur de toit standard « galvanisé ».
  • Dessins structurels d’ingénierie certifiés inclus.

Choose to pay a 25% deposit of $5,027.00 or the full amount today.

Shipping Calculator

UGS : ND Catégorie :

Description

Après avoir effectué votre achat…

Nous vous contacterons

Un expert en bâtiment Norsteel vous contactera pour obtenir plus de détails sur l’emplacement spécifique de votre site et les codes du bâtiment locaux. Ils travailleront avec vous par téléphone pour finaliser la conception de votre structure.

Vous recevrez vos dessins

Votre structure EasyBuild sera ensuite conçue sur mesure pour l’emplacement spécifique de votre site, en tenant compte des codes du bâtiment de votre zone exacte. Dans environ 2 semaines, vous recevrez des dessins techniques certifiés pour votre structure.

Nous vous livrerons votre kit

Nous vous tiendrons informés de la date prévue de livraison de votre structure. Votre kit arrivera dans un seul colis et vous pourrez commencer à construire votre structure immédiatement !

 

* Portes de service et de garage non incluses.
** Gouttières et descentes pluviales non incluses.
*** Norsteel se réserve le droit de refuser toute commande pour quelque raison que ce soit. Des frais de transport supplémentaires peuvent être engagés si les lieux de livraison sont éloignés et ne correspondent pas à nos itinéraires d’expédition standard.

Informations complémentaires

Wall Colour
Trim Colour

Norsteel E-store Payment Plan

What is included in the kit:

  • Steel Beam framing
  • Steel roof & wall panels (26ga)
  • Complete trim package
  • Foundation anchor bolt plans
  • Engineer stamped plans
  • Building kit delivery/freight (Additional freight costs may be incurred if delivery locations are remote and fall outside of our standard shipping routes.)
  • Installation instructions
  • All bolts, flashing & sealants

What is excluded from the kit:

  • Permits
  • Installation
  • Foundation
  • Insulation
  • Windows, service and garage doors
  • Interior build out
  • Gutters and downspouts

Optional Add-Ons:

  • Insulation: Enhance thermal efficiency, reduce energy costs, and minimize noise and condensation with high-quality insulation options.
  • Gutter System: Integrated gutters and downspouts ensure efficient water management, available in any trim colour (26 gauge) to complement your building’s design.
  • Liner Panels: Add premium 26-gauge roof and wall liners for improved aesthetics and protection, available in any wall colour to match your building’s look.
  • Framed Door and Window Openings: Customize your building with precisely framed door and window openings, tailored to your specific needs and ideal placement.
  • Service Door: Insulated metal man doors provide secure and easy access to your building, designed for durability and functionality.
  • Framed Door and Window Openings: Add extra custom-framed door and window openings to your building design, allowing for tailored placement and the perfect fit for your functionality and design goals.

Step 1: We will Reach Out

A Norsteel expert will contact you to finalize the details of your building project. We will gather information about your site location, local building codes, and any specific needs you have. If you’re interested in any optional add-ons, please inform your building consultant so they can provide a detailed breakdown of any additional costs during your consultation.

Step 2: Receive Your Custom Engineered Drawings

Your building will be custom-engineered for your location and requirements. In about 2 weeks, you will receive certified, engineered drawings that include all the details you need, such as anchor bolt locations and foundation calculations.

Step 3: Preparing for Delivery

Once your building is in production, we will keep you updated on the timeline. As soon as everything is ready, we will confirm your delivery date and provide all the details you need to prepare for the arrival of your kit.

Step 4: Your Kit Arrives

Your EasyBuild structure will arrive as a complete package, including all the components needed to begin building immediately. Each part is clearly labeled for easy assembly. If you encounter any challenges during installation, simply reach out to Norsteel — we are here to help!

Approximately 3 weeks prior to your building’s arrival, you’ll receive an email with the confirmed delivery date along with all the necessary information. The building components will arrive on a flatbed trailer and will be organized onto a skid in one large bundle, banded together. Depending on the size of your building, you may have more than one skid. Each skid has 5 separate layers to off-load, one at a time from the top down.

The heaviest piece will be the hardware box weighing approximately 4000 lbs. This wooden box is 22‘ long, 3‘ high and 4‘ wide. The 4 remaining small bundles will be significantly lighter, weighing from 1500 to 2000 lbs each. We suggest that you have a forklift or similar vehicle available to facilitate unloading.

All Norsteel Buildings are engineered to meet or exceed national, provincial and state requirements and codes. Stainless steel capped fasteners, superior precision paint coating, along with galvanized girts and purlins keep Norsteel buildings looking like new for decades to come. We are so confident in the quality, strength, and durability of our products that we offer a full array of industry-leading warranties:

  • 25-Year, Limited Rust-Through Perforation Warranty on AZ55 Galvalume® Roof Panels
  • 40-Year Limited Paint Warranty
  • 30-Year Limited Chalking and Paint Colour Change Warranty
  • Stainless Steel Capped Fasteners with a Lifetime Warranty
Do you sell any accessories for the EasyBuild kits?
The Easybuild Kit is available with several accessories – service doors, gutters and downspouts, interior liner panels, overhangs, and coloured roof systems. We also have a full range of insultaion packages available to accomodate any needs. If you are interested in any of these options, you can let us know when we call you to confirm your order.
Whether you need permit approval will depend on your local permit office, the size of your building and where your site is located. If you do need approval from your town, the drawings that we will send you are exactly what you will need to present to them in terms of your structure. They are certified engineered drawings that will be stamped by an engineer who is licensed to practice in your specific area.
Absolutely! Every Norsteel building – whether it is a DIY project or a shopping mall, is custom-designed to meet or exceed the building loads for its location. Our reputation depends on it.
The kit will arrive on a flatbed truck. With good planning, we can fit 2 and sometimes 3 EasyBuild structures on each flatbed and we do our very best to fill each truckload. This keeps our cost down and we pass those savings on to our DIY customers. Well before shipping day arrives, customers are contacted with specific instructions regarding the delivery of their Norsteel building package. The truck driver will call you so you have an accurate time of arrival. It is imperative that they ensure that the truck has clear access to the job site. This means that the truck must be able to get in and out of the site unencumbered.
The building components will arrive on a flatbed trailer and will be in one large bundle, banded together. Once the band is broken, the skid can easily be off-loaded with a fork-lift. The skid has 5 separate layers to off load, one at a time from the top down. The heaviest piece will be the hardware box weighing approximately 4000lbs. This wooden box is 22‘long, 3‘high and 4‘wide. The 4 remaining small bundles will be significantly lighter, weighing from 1500 to 2000 lbs each. Having machinery on site certainly makes unloading your building components a quick and easy process. But, part of the beauty of the EasyBuild is the minimization of heavy equipment required. Here too, is an opportunity for savings: it is possible for customers to off-load the EasyBuild by hand. Once the banding has been cut with a very strong pair of metal cutters, the wooden crate must be opened, and the entire building can be off-loaded in approximately 2 hours by a team of 5 or 6 strong people.
Under the terms of our contract, customers are responsible for off-loading all building components from the truck.
Before your delivery date, we will send you a packing list for inventory purposes. Once the truck has arrived on-site, the truck driver will take photographs of the load for comparison purposes. You should take pictures too. Please, also take inventory of all components. Since all parts are clearly labelled, you will be able to inventory all components and ensure that they have been delivered. In the unlikely event that any parts are missing or damaged, please take photographs and contact us immediately so that appropriate corrections can be made without delay.
Call us! We’re always here to help. Our office hours are Monday to Friday, 9:00 AM – 5:00 PM EST (UTC-5). We want you to be 100% satisfied with your building and sometimes, DIY projects can be a little confusing. Just call us – we are more than happy to answer any questions and guide you during your assembly phase.

Vous aimerez peut-être aussi…

Produits similaires