We call our Norsteel C-Channel the EasyBuild Steel Building<\/em><\/strong> because we began carrying this product line specifically for our Do-it-Yourself Customers who had been asking for a simpler steel building that they could construct on their own.\u00a0<\/p>\r\n\r\n\r\n\r\n This blog will provide you with an introduction to our EasyBuild Steel Building Kit<\/a>. It will give you an overview of the structural support system that gives it strength and the components that give it aesthetic appeal.\u00a0<\/p>\r\n\r\n\r\n\r\n Our EasyBuild steel structure can be described as a C-Channel building because it is formed from several steel members shaped into a c-channel. These are bolted together to form the I-beams that are the structural basis for this metal building system.<\/p>\r\n\r\n\r\n\r\n The Norsteel EasyBuild Steel Building provides the same conventional look of a Rigid Frame steel structure at the affordable cost of a Quonset or wood build. \u00a0This is because the EasyBuild is a simple structure. There is less design required to engineer it, there is no welding in manufacturing, and it is a lighter gauge structure, so there is less steel.<\/p>\r\n<\/div>\r\n\r\n\r\n\r\n In fact, our EasyBuild Metal Buildings are affordable and more efficient on every level. From engineering, to manufacturing, to shipping, and even off-loading and assembly; the EasyBuild is the most affordable choice for simple, clear-span space \u2013 Especially when customers are looking for structures up to 35\u2019 in width.<\/p>\r\n\r\n\r\n\r\n Because it is marketed as a Do-it-Yourself Kit that can be assembled with minimal use of equipment (many of our customers assemble with ladders and scaffolding), the savings continue right into the assembly of the EasyBuild steel building. Handy people can easily follow the DIY instruction manual and blueprints to erect their own steel buildings without the use of heavy machinery or crews of workers. \u00a0The new, innovative creation of our EasyBuild Foundation Kit further increases savings in time and money by decreasing the amount of concrete that is needed in the foundation.<\/p>\r\n\r\n\r\n\r\n Our EasyBuild Structures have a hot-dip galvanized steel frame<\/strong>. In fact, all primary and secondary framing members in our EasyBuild model are zinc coated. This zinc galvanizing process prevents rust and ensures a long life-cycle of performance.<\/p>\r\n\r\n\r\n\r\n When we speak about the Primary Structural Support of a Pre-Engineered Steel Building, essentially, we are addressing the framing of the building. \u00a0The Primary structural support system is the main support of a pre-engineered steel building. For this reason, we often refer to the primary structural support systems as the main framing system of the building. It follows that when a frame is at an Endwall, it is called an Endwall Frame<\/strong>, and when a frame is within the building, it is called an Interior frame<\/strong>.<\/p>\r\n<\/div>\r\n<\/div>\r\n\r\n\r\n\r\n Interior and Endwall Frames are laid out in a carefully engineered pattern to provide the primary support for Metal Building Systems.<\/p>\r\n\r\n\r\n\r\n The distance between the centerline of each of the frames is called a Bay<\/strong>. \u00a0Bay Spacing is an important factor in determining the design of your structure. The required width of each bay is something that customers should consider because it will have an effect on where you are able to place windows and service doors along the sidewalls of your EasyBuild metal building system.<\/p>\r\n<\/div>\r\n\r\n\r\n\r\n The Primary Framing in our EasyBuild Steel Structure consists of galvanized, C-Channels which are bolted together to form the structural basis of the building. Typically, these c-shaped channels are 8\u201d in depth, but this can change depending on the design and location of the steel building. Two C-Channels bolted back to back form the \u201cI\u201d beam that is equivalent to the primary framing of the Rigid Frame Metal Building System.<\/p>\r\n\r\n\r\n\r\n Tip:<\/strong> In keeping with the simplicity of the EasyBuild steel structure, Interior and Endwall Frames are created equally, and there are no expandable Endwalls.<\/em><\/p>\r\n\r\n\r\n\r\n By far the most functional component of Pre-Engineered Steel buildings is the Clear-Span Primary Framing system. We call these frames \u201cClear-Span\u201d simply because they require no interior columns or support between the exterior columns. An amazing thing for any customer looking to achieve 100% usable interior space! In fact, it is the Clear-Span Rigid Frame that first revolutionized construction and made metal buildings such an incredibly versatile and innovative investment.<\/p>\r\n\r\n\r\n\r\n The frame on our EasyBuild steel building has straight vertical columns attaching to straight rafters. These c-channels bolt together to form the I Beams of the steel building – meaning that if you took a cross-section through either a column or rafter section, you would have an I-shape.<\/p>\r\n\r\n\r\n\r\n In our EasyBuild product line, the primary framing is reinforced with thick metal plates<\/strong> in three specific spots on each frame:<\/p>\r\n\r\n\r\n\r\n The center point and the haunch are the thickest parts of the primary framing in the EasyBuild Metal Building system simply because these are load bearing spots <\/strong>on the building. It follows that they must support great force, and so, we must reinforce that area with thick steel plates.<\/p>\r\n\r\n\r\n\r\n Exactly like the Rigid Frame Metal Buildings, the EasyBuild Primary Framing is designed to bear the load for half the bay of the roof on either side of its location and transfer that loading to the foundation.<\/p>\r\n\r\n\r\n\r\n Tip:<\/strong> Unlike the Rigid Frame, the primary framing components of our EasyBuild steel structures can be bolted together in sub-assemblies on the ground, where work is faster and safer. This requires fewer lifts and fewer connections to be made in the air by our DIY customers.<\/em><\/p>\r\n\r\n\r\n\r\n When we are speaking about the Secondary support system of a Pre-Engineered Metal Building system, we are referring to the Purlins and Girts. These structural members are the steel components that run horizontally across the roof and walls, spanning the primary framing.<\/p>\r\n\r\n\r\n\r\n Girts and Purlins are essentially the same with the only difference being their location on the building, and they have 2 main functions: To transfer the loads to the primary framing, and to provide a surface onto which the roof and wall panels are screwed.<\/p>\r\n\r\n\r\n\r\n We refer to the secondary system that provides structural support to the roof as the Purlins<\/strong>.<\/p>\r\n\r\n\r\n\r\n The Purlins on our EasyBuild Structure consist of galvanized z-channels which are 6\u201d in depth. These 6\u201d purlins are standard in the EasyBuild Structure, but purlins may be produced in greater depth \u00a0to provide greater strength to structures that will be constructed in areas with high snow loads. The depth of the purlin as well as the spacing, is determined by the engineering itself and is dictated by both the design of the structure as well as its location.<\/p>\r\n\r\n\r\n\r\n The job of the purlins is to transfer roof loads to the primary structural support system, which in turn transfers the loads to the foundation.<\/p>\r\n<\/div>\r\n\r\n\r\n\r\n We refer to the secondary system that provides structural support to the walls of a Metal Building System, as the Girts<\/strong>.<\/p>\r\n\r\n\r\n\r\n Girts run horizontally between the frames of the walls and are attached to the columns.<\/p>\r\n\r\n\r\n\r\n Like the Purlins, the Girts of our EasyBuild Structure consist of galvanized z-channels and the spacing of the Girts, varies with the load imposed on them. The depth of the Girts used in a structure is also determined by the particular loading requirements for that structure. Like purlins, girts are typically 6 inches in depth. Occasionally, deeper secondary members are necessary for specific applications and site locations.<\/p>\r\n\r\n\r\n\r\n The Girts take the loads imposed on the wall system and transfer them to the frames, which in turn, transfer them to the foundation.<\/p>\r\n\r\n\r\n\r\n Tip: One last thing to mention when we are discussing secondary structural members of a metal building system, is that the Eave Strut is located at the intersection of the roof and the exterior wall. It acts as both the first Purlin and the last Girt. This is important because the building height for a pre-engineered steel building is always recorded as the measurement to the top of this steel member – It is the eave height that is recorded as the height for the building, not the peak height of the structure.<\/p>\r\n\r\n\r\n\r\n The final structural support system of the EasyBuild Steel Building is the Bracing system. As its name implies, the bracing system functions to resist the forces of the elements and to transfer these loads to the secondary and primary framing systems. The Bracing System for the EasyBuild Structure is accomplished with a combination of Elbow Bracing and Diaphragm Bracing.<\/p>\r\n\r\n\r\n\r\n Elbow Bracing, is used to brace<\/em> the building against forces from the elements. The elbow bracing on the EasyBuild Steel Structure is found between the girts and the primary framing system. Thick steel members are used to provide bridges of additional strength and are bolted and bent into position in the corners from the girts to the primary frames.<\/p>\r\n\r\n\r\n\r\n Where the bracing goes and how much is needed depends on the design of the building and its location. \u00a0A structure that is situated in a municipality with high wind load for example, will require more bracing than one in a different municipality with mild wind. Likewise, a structure designed with an open wall, will require more bracing than a structure that is completely closed.<\/p>\r\n\r\n\r\n\r\n Another type of bracing that is used to establish structural integrity in a pre-engineered steel building is Diaphragm Bracing. Diaphragm Bracing is inherent in most metal building systems, and results from the presence of the cladding \u2013 the exterior panels that cover the primary and secondary framing of the steel building. \u00a0Cladding provides the building with aesthetically pleasing color, and it obviously finishes the wall and roof skeleton of the building. In doing so, it provides yet another defensive brace against the loadings that impinge on the structure itself.<\/p>\r\n\r\n\r\n\r\n Our EasyBuild Metal Building System relies heavily on diaphragm bracing for structural support. \u00a0This means that the number and size of doors will be limited, especially on the Sidewalls of the building, simply because removing too much of the cladding means compromising the structural integrity of the building.<\/p>\r\n\r\n\r\n\r\n The wall panels for our EasyBuild Steel Building come in twelve popular colors with a 40-year limited warranty against chipping, cracking, flaking or peeling. The paint has a siliconized polyester finish with a substrate galvanized coating beneath the paint providing further protection against rust.<\/p>\r\n\r\n\r\n\r\n The wall panels are continuous from floor to eave and meet or exceed required wind loads. These panels are 26-gauge as standard. All wall panels are attached to the girts with screws that come assembled with neoprene washers. The washers eliminate the potential for rust by preventing damage to the sheeting. The heads of the screws are painted to match the color of the sheeting. They will not rust, tarnish or turn black.<\/p>\r\n\r\n\r\n\r\n Galvalume roof panels are standard on all our EasyBuild steel buildings. Our roof panels are 26-gauge high-tensile steel with a corrugation depth of 1-1\/4\u201d. The Purlin Bearing Rib (PBR) roof system provides a full overlap, which means our buildings are weather-tight, even under extreme conditions.<\/p>\r\n\r\n\r\n\r\n Rigid-rib panels are designed for long-life and pre-cut to building dimensions. AZ55 Galvalume\u00ae is an aluminum\/zinc coating, which protects the roof sheeting against rust. It requires no maintenance or painting to retain its original luster and is comprised of 55% aluminum, 44% zinc and 1% silicone.<\/p>\r\n\r\n\r\n\r\n The AZ55 roof panels have a high aluminum content providing superior protection against rust and backed by a 25-year, limited rust-through perforation warranty. In addition, the self-drilling roof fasteners are stainless steel capped and come fully assembled with a self-sealing neoprene washers for a weather-tight seal and a limited lifetime rust warranty.<\/p>\r\n\r\n\r\n\r\n Our EasyBuild Steel Buildings come standard with a screw-down Galvalume roof system.<\/p>\r\n\r\n\r\n\r\n The Trim Package for the EasyBuild Structure is supplied at no additional charge and serves to provide a finished appearance as well as added protection against leaks and the possibility of rodent and insect infestation.<\/p>\r\n\r\n\r\n\r\n Trim is available in six complementary colors.<\/p>\r\n\r\n\r\n\r\n Norsteel\u2019s EasyBuild Steel Building System<\/em><\/strong> is the ideal choice for DIY projects. In fact, we began carrying this product line specifically for our Do-it-Yourself Customers who had been asking for a simpler pre-engineered steel building that they could construct on their own.<\/p>\r\n\r\n\r\n\r\n Backed by the same theoretical pre-engineered design as our Rigid Frame metal building system, the Norsteel EasyBuild Steel Building provides the same strong engineering and conventional look of its rigid frame cousin, but at the affordable cost of a Quonset or wood structure.<\/p>\r\n\r\n\r\n\r\n This is because the EasyBuild is a simple construction with fewer options, making it affordable and more efficient on every level. From engineering, to manufacturing, to shipping, and even off-loading and assembly; the EasyBuild is the most affordable choice for simple, clear-span space \u2013 Especially when customers are looking for structures 35\u2019 in width or smaller. This has made our EasyBuild Steel Building a very popular choice for garages and backyard shops<\/a>.<\/p>\r\n\r\n\r\n\r\n It took us a long time to come up with a DIY product line that measured up to the Norsteel standards. We even put one together ourselves with our consultant team to make sure it was everything that we were hoping for in a do-it-yourself steel building before we offered it to our customers. The EasyBuild Steel Building Kit is a welcome addition to the Norsteel product line.<\/p>\r\n\r\n\r\n\r\nWhat is the Norsteel EasyBuild C-Channel?<\/strong><\/strong><\/h2>\r\n\r\n\r\n\r\n
History and Origin<\/strong><\/h3>\r\n\r\n\r\n\r\n
![\"c-channel](\"https:\/\/norsteelbuildings.com\/wp-content\/uploads\/2021\/05\/C-Channel-resized.jpg\")
<\/figure>\r\n<\/div>\r\n<\/div>\r\n\r\n\r\n\r\nEasyBuild Steel Building – Components<\/strong><\/h3>\r\n\r\n\r\n\r\n
1. Primary Structural Support System<\/strong><\/h4>\r\n\r\n\r\n\r\n
![\"C-Channel](\"https:\/\/norsteelbuildings.com\/wp-content\/uploads\/2021\/05\/C-Channel-Diagram-1.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n![\"C-Channel](\"https:\/\/norsteelbuildings.com\/wp-content\/uploads\/2021\/05\/C-Channel-Diagram-2.jpg\")
<\/figure>\r\n<\/div>\r\n<\/div>\r\n\r\n\r\n\r\nClear Span Primary Framing<\/h5>\r\n\r\n\r\n\r\n
\r\n
2. Secondary Structural Support System<\/strong><\/h4>\r\n\r\n\r\n\r\n
The Purlins<\/h5>\r\n\r\n\r\n\r\n
![\"C-Channel](\"https:\/\/norsteelbuildings.com\/wp-content\/uploads\/2021\/05\/C-Channel-Diagram-3.jpg\")
<\/figure>\r\n<\/div>\r\n<\/div>\r\n\r\n\r\n\r\nThe Girts<\/h5>\r\n\r\n\r\n\r\n
3. The Bracing System<\/strong><\/h4>\r\n\r\n\r\n\r\n
Elbow Bracing<\/h5>\r\n\r\n\r\n\r\n
Diaphragm Bracing<\/h5>\r\n\r\n\r\n\r\n
4. The EasyBuild Paneling System<\/strong><\/h4>\r\n\r\n\r\n\r\n
Wall Panels<\/h5>\r\n\r\n\r\n\r\n
Roof Cladding<\/h5>\r\n\r\n\r\n\r\n
Trim Package<\/h5>\r\n\r\n\r\n\r\n
Closing Out<\/strong><\/h2>\r\n\r\n\r\n\r\n